Every rooftop unit, every location, one screen
Ten locations or three hundred, the problem is the same: nobody can see the whole portfolio. Elite Energy Management monitors every rooftop unit across all your sites automatically and ranks them by health, so your team spends its week on the equipment that actually needs attention.
Portfolio HVAC runs on complaints, not data
Multi-site operators manage HVAC through a haze: store managers who report comfort, contractors who report what they found after arriving, and utility bills that arrive a month too late to act on. The equipment knows what is coming. Nobody is listening to it.
Dispatch is driven by whoever calls loudest
Without portfolio-wide data, service dollars flow to the squeakiest location, not the equipment closest to failing. The quiet store with the dying compressor waits its turn until it becomes an emergency.
Emergency repairs cost 3 to 5x more
A planned service call runs $200 to $400. An emergency call runs $800 to $1,500 or more, and roughly 70% of repair and maintenance spend at multi-site operations happens reactively.
Capital planning is guesswork
Which units should be replaced next year and which have five years left? Without degradation data per unit, replacement budgets are built on age and anecdote instead of evidence.
Growing the portfolio means growing the blind spot
Every acquisition and every new build adds rooftop units nobody is watching. Facilities headcount never scales as fast as the location count does.
Why site-level dashboards do not add up to portfolio visibility
Each location's thermostat or EMS shows that site holding setpoint. What no site-level view can show is the pattern: which locations are outliers, which units are drifting away from their own healthy baseline, and where next month's emergency is currently developing. Portfolio intelligence requires normalized, unit-level data across every site in one system.
- A degrading unit holds setpoint for weeks while burning far more energy than it should. No alarm fires at the site, and nothing rolls up to the portfolio.
- Cross-site comparison requires weather normalization and per-unit baselines. Raw runtime numbers mislead more than they inform.
- The signal that matters is a trend across weeks, exactly the thing nobody has time to watch manually across hundreds of units.
What Elite Energy Management does differently
We connect to the thermostats and energy management systems your locations already have, collect readings from every rooftop unit every 60 seconds, and let AI learn how each unit behaves when it is healthy. Your whole portfolio rolls up into one ranked view.
Every location ranked by health
Every rooftop unit gets a 0 to 100 health score, updated nightly, and every location is ranked so Monday morning starts with a priority list instead of a mystery. Running well, Monitoring, or Action needed.
Early warning, not a breakdown
Our AI models compare each unit against its own history, weather normalized so hot days do not trigger false alarms. In real world cases the platform has flagged developing failures 1 to 9 days before they surfaced.
Peer benchmarking across the portfolio
See how each location's HVAC performance compares to similar sites in your portfolio and region. Outliers stand out immediately, and all peer comparisons are fully anonymized.
Ask the portfolio a question
The AI assistant answers questions like "which location is spending the most on HVAC this month" or "which units should we check before the heat wave" with specific numbers and recommended next steps.
One location, three developing failures, zero phone calls
At a single restaurant location we monitor, three separate problems were developing at once: a kitchen compressor struggling to start, a dining unit compressor headed for replacement, and blown fuses on a third unit. All three were flagged on the dashboard before anyone at the site called anything in, two of them five days before technicians confirmed the faults. That is the portfolio problem in miniature. Site staff see comfort. The data sees three failures forming, ranks them, and puts them on the right person's screen while every one of them is still a planned repair.
No new hardware. No installation visits.
We integrate with the equipment your locations already have, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If you do not have an energy management system yet, we partner with eViewIoT to get you connected. Data starts flowing in hours, and the AI starts learning your equipment on day one.
- Connect once per EMS platform and every location on it comes online together. No site visits, no hardware.
- Locations on different thermostat systems appear side by side, normalized, in one dashboard.
- Pricing starts at $5 per unit per month, and monitoring is read only. We never control your equipment.
Common questions from multi-site operators
Yes. The platform connects to multiple systems, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi, and normalizes the data so every location appears in the same dashboard with the same health scores.
Onboarding is measured in hours, not weeks. Once we connect to an EMS platform, every location on it comes online together, whether that is 10 sites or 200, and the AI begins learning each unit's baseline immediately.
Facilities and operations teams use the ranked health view to plan the week. Owners and finance leaders use cost and benchmarking views. Store or site managers do not need to do anything at all.
Yes. Capacity degradation tracking shows how much cooling output each unit has lost versus its healthy baseline, so replacement budgets can target the units that are actually failing rather than just the oldest ones.
Pricing starts at $5 per rooftop unit per month with volume pricing for larger fleets. Most operators find a single avoided emergency pays for months of monitoring across an entire region.
Start Monday with a ranked list, not a mystery
Start a free 30 day pilot. No hardware, no commitment, and your first portfolio health rankings within days of connecting.
Start free 30 day pilot